- SKU: PM3489-W
- A Interchanges: 689070W091, 68907-0W091, 689070W101, 68907-0W101, 689080W091, 68908-0W091, 689080W101, 68908-0W101, PM1062N10, PM3489
- BC Body Connector End Fitting Type TN: portal.liftsupportsdepot.com/images/endfitting/pc1249-2.gif
- BC Shaft Connector End Fitting Type TN: portal.liftsupportsdepot.com/images/endfitting/pc1249-2.gif
- Body Connection: Ball Socket U Band (Nylon)=10mm=3/8"=.39"
- Compressed Length B [in]: 15.79
- Custom Qty: 1
- Cylinder Diameter (MM): 22
- End Fitting Size: 10MM
- End Fitting Type: Ball Socket
- Extended Length A [in]: 22.56
- Finish: Black
- Force (Lbs): 240
- Force Newtons: 1068
- Include In Length Search: No
- Include In mmty Search: Yes
- MSDS Info: Click Here to Download the Lift Supports Depot MSDS Sheet.
- Manufacturer: Lift Supports Depot
- Manufacturer Logo: portal.liftsupportsdepot.com/images/nextopia/liftsupportlogosmall.gif
- Name (Fitment): Made by Lift Supports Depot Fits the Liftgate | PM3489
- Quantity Sold As: Each
- Ref Code: 0
- Rod Diameter (MM): 10
- Shaft Connection: Ball Socket U Band (Nylon)=10mm=3/8"=.39" 16 Deg.
- Stroke C [in]: 6.25
- Vehicle Location: Liftgate
29 Reviews Hide Reviews Show Reviews
-
Excellent replacement supports
I purchased these to replace the factory supports on the rear lift gate of my 2014 4Runner. Installation was easy and they work so much better than the ones I replaced. No complaints at all.
-
Perfect for aftermarket ladders
I bought a CBI ladder for my truck, this strong strut was perfect and easy to install.
-
Great struts
I installed a victory 4x4 ladder on my 2016 4runner rear hatch, and the added weight was too much for the stock Toyota struts. The hatch wouldn’t open without me having to lift it, and it wouldn’t stay open without me having to hold it. I installed these upgraded struts and now the hatch is as good as new. Highly recommend.
-
PM3489
Installed these on 2016 TRD PRO 4Runner. Had put a Baja Rack Ladder mounted to rear hatch and stock struts were not cutting it/not lifting the gate all the way. Put these on and it work great; smoothly lifts the gate all the way to top. I am 6'2, so having the hatch go all the way now the way it is supposed to is big bonus/wish I had put these on sooner. Easy to install.
-
So far so good
So far so good
-
Lift Support
Works great! I have a 2017 4runner with a C4 hatch ladder and the trunk lid goes up without effort and does not sag.
-
PM3489 hatch lift for C4 ladder
Easy to install. C4 Fabrication ladder too heavy for stock but these lift it perfectly. Have had for a year with no issues. Recently added 2 Maxtrax and these aren't enough so will be buying next stronger ones.
-
Lift Supports for 4Runner TRD Pro
Works very well to lift the rear gate of my TRD Pro 4Runner with Gobi Ladder installed. No stalling half way up or need to push all the way open. Super easy installation even for one person.
-
PM3489 Lift Support
Worked perfectly for my C4 ladder with steps.
Thank you!
